View P4KE68A_4689920.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

P4KE6.8 thru P4KE550CA
Transient Voltage Suppressors Peak Pulse Power 400W Breakdown Voltage 6.8 to 550V
Features
Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated junction 400W peak pulse power capabililty on 10/1000uS waveform, repetition rate (duty cycle): 0.01% Excellent clamping capability Low incremental surge resistance Very fast response time High temperature soldering guaranteed: 265oC/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension
Mechanical Data
Case: JEDEC DO-204AL(DO-41) molded plastic body over passivated junction Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: For unidirectional types the color band denotes the cathode, which is positive with respect to the anode under normal TVS operation Mounting Position: Any Weight: 0.012oz., 0.3g
Devices for Bidirectional Applications For bi-directional, use C or CA suffix for types P4KE6.8 thru types P4KE440 (e.g. P4KE6.8C, P4KE440CA). Electrical characteristics apply in both directions.
Maximum Ratings and Characteristics
(TA=25oC unless otherwise noted)
Parameter Peak power dissipation with a 10/1000us waveform (Fig. 1) Peak pulse current with a 10/1000us waveform Steady state power dissipation at TL=75oC, lead lengths 0.375" (9.5mm) (2) Peak forward surge current, 8.3ms single half sine-wave unidirectional only (3) Maximum instantaneous forward voltage at 25A for unidirectional only (4) Typical thermal resistance junction-to-lead Typ. thermal resistance junction-to-ambient, LLead=10mm Operating junction and storage temperature range
(1) (1)
Symbol P PPM IPPM PM(AV) IFSM VF RJL RJA TJ, TSTG
Value Minimum 400 See Next Table 1.0 40 3.5/5.0 60 100 -55 to +175
Unit W A W A Volts
o
C/W C/W
o
o
C
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25oC per Fig. 2 2. Mounted on copper pad area of 1.6 x 1.6" (40 x 40mm) per Fig. 5 3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum 4. VF=3.5 V for devices of V(BR)<220V, and VF=5.0 Volt max. for devices of V(BR)>220V
565
Electrical Characteristics
(Ratings at 25oC ambient temperature unless otherwise specified.)
Breakdow n voltage V(BR) (Volts) (1) Device type P4KE6.8 P4KE6.8A P4KE7.5 P4KE7.5A P4KE8.2 P4KE8.2A P4KE9.1 P4KE9.1A P 4K E 10 P 4K E 10A P4KE11 P4KE11A P 4K E 12 P 4K E 12A P 4K E 13 P 4K E 13A P 4K E 15 P 4K E 15A P 4K E 16 P 4K E 16A P 4K E 18 P 4K E 18A P 4K E 20 P 4K E 20A P 4K E 22 P 4K E 22A P 4K E 24 P 4K E 24A P 4K E 27 P 4K E 27A P 4K E 30 P 4K E 30A P 4K E 33 P 4K E 33A P 4K E 36 P 4K E 36A P 4K E 39 P 4K E 39A P 4K E 43 P 4K E 43A P 4K E 47 P 4K E 47A P 4K E 51 P 4K E 51A P 4K E 56 P 4K E 56A Min. 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 Max. 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8
Test current at IT (mA) 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
Stand-off voltage VWM (Volts) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8
Maximum reverse leakage at VWM ID(3) (uA) 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
Maximum peak pulse current IPPM(2) (A) 37.0 38.1 34.2 35.4 32.0 33.1 29.0 29.9 26.7 27.6 24.7 25.6 23.1 24.0 21.1 22.0 18.2 18.9 17.0 17.8 15.1 15.9 13.7 14.4 12.5 13.1 11.5 12.0 10.2 10.7 9.2 9.7 8.4 8.8 7.7 8.0 7.1 7.4 6.5 6.7 5.9 6.2 5.4 5.7 5.0 5.2
Maximum clamping voltage at IPPM VC (Volts) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0
Maximum temperature coefficient of V(BR) (% / oC) 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.076 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103
566
Electrical Characteristics
(Ratings at 25oC ambient temperature unless otherwise specified.) Breakdow n voltage V(BR) (Volts) (1) Device type P 4K E 62 P 4K E 62A P 4K E 68 P 4K E 68A P 4K E 75 P 4K E 75A P 4K E 82 P 4K E 82A P 4K E 91 P 4K E 91A P 4K E 100 P 4K E 100A P4KE110 P4KE110A P 4K E 120 P 4K E 120A P 4K E 130 P 4K E 130A P 4K E 150 P 4K E 150A P 4K E 160 P 4K E 160A P 4K E 170 P 4K E 170A P 4K E 180 P 4K E 180A P 4K E 200 P 4K E 200A P 4K E 220 P 4K E 220A P 4K E 250 P 4K E 250A P 4K E 300 P 4K E 300A P 4K E 350 P 4K E 350A P 4K E 400 P 4K E 400A P 4K E 440 P 4K E 440A P 4K E 480A P 4K E 510A P 4K E 530A P 4K E 540A P 4K E 550A Notes: Min. 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 198 209 225 237 270 285 315 333 360 380 396 418 456 485 503.5 513 522.5 Max. 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 263 330 315 385 368 440 420 484 462 504 535 556.5 567 577.5 Maximum reverse leakage at VWM ID(3) (uA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
Test current at IT (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0
Stand-off voltage VWM (Volts) 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 408 434 450 459 467
Maximum peak pulse current IPPM(2) (A) 4.5 4.7 4.1 4.3 3.7 3.9 3.4 3.5 3.1 3.2 2.8 2.9 2.5 2.6 2.3 2.4 2.1 2.2 1.9 1.9 1.7 1.8 1.6 1.7 1.6 1.6 1.4 1.5 1.2 1.2 1.1 1.2 0.93 1.0 0.79 0.83 0.70 0.73 0.63 0.66 0.61 0.57 0.55 0.54 0.52
Maximum clamping voltage at IPPM VC (Volts) 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 658 698 725 740 760
Maximum temperature coefficient of V(BR) (% / oC) 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110
1. V(BR) measured after IT applied for 300us, IT=square wave pulse or equivalent 2. Surge current waveform per Fig. 3 and derate per Fig. 2 3. For bidirectional types having VWM of 10 volts and less, the ID limit is doubled 4. All terms and symbols are consistent with ANSI/IEEE C62.35 5. For parts without A, the VBR is +10% 567
RATINGS AND CHARACTERISTIC CURVES
(TA = 25oC unless otherwise noted)
568

▲Up To Search▲

Price & Availability of P4KE68A

	To Download P4KE68A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .